{"HTML": "<h3>\n<font color=\"#085294\">Conclusions</font>\n</h3>\n<p>\n This one dataset with the most net work through the portion of the cycle analyzed was geometry 11 with a start of injection at -10.2 degrees, a swirl of 2.38. The average swirl increased to above 14 through the stroke, which was contributed to better mixing and therefore the increased power. Unfortunately 40% of the volume of the cylinder was above 1800 deg K at one point in the cycle that coincided with the time that 20% of the volume had an equivalence ratio was greater than 1 (air rich). Some further investigation will need to be done to look at pollution levels of this cylinder design.\n</p>\n<p>\nOverall, this appears to be a satisfactory candidate for design and test and further analysis in a subsequent design review.\n</p>\n", "properties": {"TOCItem": "1", "TOCLevel": "0"}}